WiFi Connected But No Internet? Here is How to Solve It Easily!

Have you noticed often the WiFi connected but no internet reception is there? This is one of the most common complaints of many users who rely on the wireless network. The wireless internet is a technological boon as long as it is stable. But such glitches can be extremely annoying as you will not be able to access the internet at all even when the Wi-Fi is connected.

Usually, when this problem arises, the error message pops up that says “WiFi connected but no internet”. In such a situation the client device connects with the router, but cannot access the network services. It is elemental to recognize the root of the problem and then isolate it to solve it.

The problem is quite easy to solve provided you have basic technical knowledge. Hence, you need not rely on a professional to sort out such troubles. In this article, we have shared in detail the different reasons behind the problem along with the respective solutions. 

Once you master these solutions, irrespective of when the trouble arises, you can solve it quickly in no time. Read on to find out all about the internet connected but not working issues and their relevant solutions.

What Causes This Error & What Will You See?

You will often notice a tiny yellow triangle on the internet connection symbol present on the left-hand corner of the taskbar of windows. There is an exclamation mark inside this triangle. This is the symbol of Wi-Fi being connected without the internet. When you move the cursor on the internet symbol, you are likely to see one of the following messages:

  • Wi-Fi connected but no internet
  • Connected, no internet access
  • Wi-Fi has no Internet Access
  • No internet connection

Also Read: “System Thread Exception Not Handled” Error on Windows 10

This means, your Wi-Fi is connected to the local network but there is something that is blocking the internet access of your device. This may happen for several reasons. The following are a few possible causes behind the connected to WiFi but no internet issues:

  • The Wi-Fi adaptor of your computer may be defective.
  • Server of your ISP is down.
  • The IP address or Internet Protocol address of your computer is not entered correctly.
  • Antivirus of the device is blocking the connectivity.
  • The wireless drivers of the router are outdated.
  • DNS cache has been corrupted.
  • The DNS server settings of your router have been configured incorrectly.
  • There is a hardware defect in your router.
  • The wireless mode of your computer is incompatible with the latest connection technology.

Before You Start Troubleshooting: Is It One Device or the Network?

The first and foremost step to start troubleshooting for the “WiFi connected but no internet” error is to check whether the problem is occurring on one device or all your devices. Once you figure this out, you can narrow down the cause of the error and accordingly take the steps.

The following are two situations that can occur in case of such trouble:

  • Error on any one of the devices: In case the error occurs on one of the devices, it indicates faulty Wi-Fi adaptor and drivers, incorrect configuration for the internet. Apart from that, the error can also occur when there are DNS issues or problems with the IP address of the device.
  • Error on multiple devices: In case several devices pose the problem of being connected but no internet, the problem gets trickier. It indicates that your router or modem is defective or the server of the ISP is down. In both situations, you will need help from professionals to fix it.

In the next section, we have shared several ways in which the error with wireless is connected but no internet can be solved.

10 Solutions For the “WiFi Connected but No Internet” Error Message

The following are ten different ways in which you can solve the issue with Wi-Fi being connected but with no internet access. Depending on the reason behind the issue, you can implement any of these solutions:

1. Use Windows Network Troubleshooter

WiFi connected but no internet

The simplest solution that comes to our mind in such a situation is using the in-built Windows Network Troubleshooter to solve the problem. The following are the steps for doing so:

  • Go to the start menu and type in “Settings”. The Windows control panel will open.
  • Next, go to the “network and internet” option in this application.
  • Within this category, you will find the option “status” on the left-hand side menu. Once you click on it, the status troubleshooter window will open on the right side.
  • Click Run and it will detect and fix the problem. In case it does not get fixed, you can try the next step shared here.

2. Disable Fast Startup

WiFi connected but no internet

The startup feature is used to shut down and power the computer quickly. However, it can interfere with the network connection too. The solution is to disable the feature and check whether the issue is resolved. The following are the steps to disable this feature:

  • From the start menu, open the Run dialogue box. You can also do this by tapping Windows+R.
  • In the respective field, you must type in “powercfg.cpl” and then click on okay.
  • The “power options” will open when you do this.
  • On the left-hand side of this window, you will find the option “Choose what power buttons do” and click on it.
  • There are several sections under this. In the “define” section, click on “change settings currently unavailable”.
  • Next in the “shutdown settings” section, look for the option for fast startup.
  • Uncheck the checkbox beside the fast startup tab and then click on save.
  • Restart the computer and check whether the internet connection has been restored.

3. Flush Your Domain Name System (DNS)

WiFi connected but no internet

When the DNS cache becomes corrupted, it can lead to a mismatch between your device and your IP address. This may happen due to malicious code or even because of technical errors. When there is an error with the DNS, the internet will fail to connect too. You need to flush the DNS in such a situation. This can be done following the steps shared below:

  • Go to the search bar of your computer and open the command prompt and then right-click on it.
  • You need to run the command prompt app as an administrator first.
  • Next type in the comments which are shared below:
    • ipconfig /flushdns [Enter].
    • ipconfig /release [Enter].
    • ipconfig /renew [Enter].
  • After you have done this, close the command prompt window and check whether the internet connection has been restored.

4. Update Your Network Adapter Driver

WiFi connected but no internet

Updating the computer periodically is important to ensure it runs smoothly. However, if the hardware drivers are not updated, there will be incompatibility issues and as a result, the internet connection will get hampered. Hence, if you face trouble due to an outdated hardwire driver, then the first task would be to update the driver. Here are the steps for doing so:

  • You must open the “device manager” to update the drivers. This can be done from the search bar and after that open the result.
  • From here, find the “network adaptors” in the list and then click on them.
  • It will expand with several more options. From here, right-click on the “wireless” option.
  • From the drop-down menu, click on the update the driver option and the process will be started automatically.
  • In case your computer does not start it automatically, you will have to manually install the latest versions of the driver from the motherboards’ manufacturing website.

5. Check Your IP Address Validity

In case the IP address of your computer is invalid, it will have trouble accessing the internet connection. You can check the validity of the IP address through the following steps:

  • There is the network icon on the bottom right corner of your screen. Right-click on it and then select the option, “Open Network and Internet settings”.
  • Next, click on the “Change adaptor settings” option and then double click on the network option.
  • In the next window which opens, select the option “properties” which is available at the bottom. Next double clicks the option called “Internet protocol version 4.”
  • The IP address and DNS server address should be set to be obtained automatically and then click on ok. Next, try reconnecting the internet once again.

In case, the network does not connect, try the next available solution after determining what is the issue with the device.

6. Change your DNS Server Address

If you configure the DNS Server Address Incorrectly, the internet will have a problem with connectivity too. You can follow the steps provided below:

  • Press and hold down the Windows Key and then click on R. The run dialogue box will open.
  • In the text field, enter the command, “control /name Microsoft.NetworkAndSharingCenter” and hit the OK button.
  • On the top left corner of the window, click on the “change adaptor settings” option.
  • In the next window, right-click on the Wi-Fi option and then go to properties.
  • The new window will open where you must find out and then select the “Internet Protocol Version 4 (TCP/IPv4)” and then click on the Properties button underneath it.
  • The new window will open where you will get the information about how to obtain the IP address and DNS server. Set the option “Use the following DNS server address” at the bottom of this page.
  • In the next section enter in the preferred DNS address and the alternate DNS address enter and then hit OK.

7. Uninstall Conflicting Applications, Temporarily Disable Firewall and Antivirus Software

WiFi connected but no internet

There are certain applications and software which can lead to “Wi-Fi-connected no internet” issues. In such cases, your applications have to be removed or disabled to get access to the network connection. Even third-party antivirus software can be the culprit which blocks the network connection. The following are steps to disable such applications or remove them entirely:

  • Go to the control panel of your device from the windows button.
  • Within the control panel, open the system and security tab. It is available in the list of functions managed through the control panel.
  • A new window will open where you must select the windows defender firewall or whichever antivirus you are using that is posing the trouble.
  • On the left-hand side of the window, there is the option to turn the windows firewall on or off. You have to turn it off to prevent the problem from occurring again.

8. Reset TCP/IP Using the Command Prompt

The Wi-Fi-connected no internet issue can occur due to several reasons which make it trickier to detect. One such reason is problems with the TCP/IP settings. You can reset it following the steps shared below:

  • Press windows+R and in the Run window, type in “cmd” and then click on OK.
  • Next enter the commands mentioned below:
    • netsh int ip reset
    • ipconfig /release
    • ipconfig /renew
  • After this, end the process and check whether the issue has been resolved.

9. Turn Off IPv6

By turning off the IPv6 you can quickly resolve problems like Wi-Fi connected but no internet. Usually, such trouble forces the computer to automatically connect with IPv4. But if that does not happen, then you can manually turn off the IPv6 too, following the steps shared below:

  • Go to settings after pressing the windows button.
  • Select network and internet from the list of functions.
  • GO to change the adaptor settings option from here.
  • Right-click on properties. In the windows that come up, uncheck the box beside the option Internet Protocol Version 6 (TCP/IPv6).

10. Turn Off 5 GHz Bandwidth or Change the Wireless Channel

Often there is trouble with specific bandwidth and as a result, the internet does not connect. By simply changing the bandwidth of the wireless channel, you can solve the problem. If you feel there is a problem with the 5Ghz bandwidth, you can turn it off and the device will automatically switch to 2.4Ghz.

  • You need to open the advanced tab for Wi-Fi properties and select wireless mode.
  • Click on value from the drop-down menu and then set the mode to 802.11b/g.
  • After that click on OK and then save the changes.

4 Methods to Solve “WiFi Connected but No Internet” Across Your Entire Network

In case the problem with WiFi connected but no internet is occurring across several devices on your network, there are some solutions to that as well. The following are the different ways in which you can solve this trouble:

1. Check to See if Your Internet Service Provider is Down

Often all the devices on the network show wireless connectivity, but you will not be able to access the internet from any of them. This indicates that there is an internet outage in the area. You can check this by simply connecting the devices to your cellular data through a hotspot. If you can access the internet after this, it indicates an issue with the wireless network’s ISP. Waiting for the server to be fixed is the only solution to the situation.

2. Reset/Reboot Your Modem or Router

If there is no internet outage and yet you are unable to access the internet, the router or the modem may be the problem. The basic solution to the trouble is turning the router off and then turning it back on. This way, you can refresh the memory of the router which is often the primary reason behind disconnection. Unplug the router from any power source and leave it that way for a couple of minutes. Once you replug it and turn it on, the router will refresh the memory and as a result, it will be able to connect with the devices better and remember them.

3. Check MAC Address Filtering in Your Router Settings

MAC or Media Access Control is a unique identifier that is used for controlling the network access of devices. If there is any conflict between the MAC address and the router settings, then the internet connection will get hampered. Firstly, you need to check whether the address filtering option of MAC is enabled and if it is in deny or allow mode. The selected mode will determine the MAC address listed in your router will be the only one that can access the internet connection.

4. Reset Your Entire Network

In case the trouble with the WiFi connected but no internet persists after trying out all the solutions, it is best to reset the entire network and start afresh. You can do it following the steps shared below:

  • Type settings in the windows search bar and then open the network and internet option.
  • From the left-hand side go to the status option.
  • Look up the network troubleshooter option by scrolling down.
  • There will be the network reset option which you must click and follow the respective on-screen instruction to complete the process.

Frequently Asked Questions

Can you have Wi-Fi without the Internet?

The Wi-Fi connection between devices without the internet may work provided they have the respective applications. Often you may have trouble with the internet connection despite the Wi-Fi being connected. But the devices can still communicate like sharing images or videos over the wireless when you have the software for the same purpose. Thus, even without the internet, Wi-Fi does serve some purpose.

Which is better: Wi-Fi or the internet?

Wi-Fi is the wireless method of transmitting internet signals to different devices which are connected to the network. Generally, an ethernet network is faster and more stable than Wi-Fi. But having a wireless connection saves a lot of hassle with wires and hardwire and can keep several devices connected to the internet at the same time. Both have their advantages and drawbacks. To conclude, which is better depends entirely on the users’ requirement.

How can I improve my internet connection?

There are several ways you can improve the internet connection without changing the ISP-

  • Move the router to a more centralized position so that the reception is stabler even at the corners of the house.
  • Try changing the channel or the band of the connection and check whichever works faster.
  • Upgrade the router to a better model which is known for better Wi-Fi reception.
  • You can also invest in a Wi-Fi extender.
  • Remove all unused or rarely used devices from the network.
  • Add a password to your network so that there is no unauthorized access to it.

Why is my Wi-Fi so slow?

The Wi-Fi can be slow and even get disconnected for many reasons. One of the major issues is unauthorised access to the network by other users. By adding a password, you can prevent the problem. Also, restrict the number of people accessing the internet at the same time to prevent overloading the connection.

How do I fix connected but no internet access?

If you see that the Wi-Fi is connected but there is no internet connection on the device, the following can be done:

  • Try restarting the device which will refresh it and the problem is likely to get solved then and there.
  • You can also disconnect and reconnect the Wi-Fi and then check the internet.
  • Try switching the router off and turning it on again after a few minutes.
  • Apart from these, if you have any technical glitches, you can solve the problem by following the relevant troubleshooting methods for it.


The “WiFi connected but no internet” trouble hampers basic works that involve the internet, making it a major problem for many users. But now that you have a clear idea about the different solutions possible for it, you can quickly fix the trouble.

Wireless internet has become a popular mode of connectivity at home and office these days. It is slowly but surely becoming an indispensable part of our lives. Hence, disconnection for even a few minutes can become very difficult for a user. But with the right solution and basic technical knowledge you can handle all the troubles efficiently and do not have to wait for the professionals.

Leave a Comment